TopSync Ultra Speed 6ft HDMI-DVI cable, lifetime brand warranty, tested certified

This is specifically for connecting a device with an HDMI connector to another device equipped with a Single Link DVI-D connector typically found on PCs projectors and older video equipment before the HDMI standard became widespread. These cables can NOT carry audio. Voltage Rating 30V and Temperature Rating 80 Degrees Celsius. They carry video signals only! If you are looking for a High Speed HDMI Cable or a Standard HDMI Cable to connect equipment with HDMI.

Ferrite Cores are small magnetic blocks wrapped around the end of a cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat. This is the simplest and cheapest form of electronic noise reduction and is most effective on small gauge cabling which is inherently more susceptible to electronic noise interference than thicker cables. This cable is capable of the following HDMI video features:1080p Resolution – The High Speed HDMI Cable has sufficient bandwidth to transfer 1080p video signals between 1080p rated source and sink (display) devices.

You can use DP male to DVI male cable to configure a secondary monitor for extending a desktop at workstation, or creating mirrored displays to show presentations on a large screen. Slim displayport to DVI cord for monitor enables you to experience to HD sharp images for it supports video resolutions up to 1080p@60hz. If you are cabling to a port that is in a vertical configuration (the cable connector faces up), gravity will disconnect this cable from the device.

• Brand: TopSync
• Color: Black
• Length: 6ft